Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT CENTER STOP LIGHT ASSEMBLY


    E120393E01
  1. Apply battery voltage to the connector and check the center stop light comes on.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → 1 (HMSL)
    Battery negative (-) → 2 (EARTH)
    Center stop light comes on

    Text in Illustration 
    *a
    Component without harness connected
    (Center Stop Light Assembly)
    If the result is not as specified, replace the center stop light assembly.