FRONT SEAT ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 4. REMOVE FRONT SEAT ASSEMBLY |
Operate the reclining adjuster release handle and move the seatback to the upright position.
Lift up the seat track adjusting handle and move the seat to the foremost position.
![]() |
Disengage the hook of the separate type front seat cushion cover.
Disconnect each connector and clamp under the seat.
![]() |
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
![]() |
Remove the 2 bolts on the front side of the seat.
Remove the front seat assembly.