Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH

VSC OFF SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B315240
  1. Turn the knob counterclockwise and remove the shift lever knob sub-assembly.



2. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transmission)


    B315182
  1. Remove the 4 screws and the shifting hole cover sub-assembly.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)


    B315179
  1. Turn the knob counterclockwise and remove the shift lever knob sub-assembly.



4. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)


    B315183
  1. Remove the 2 screws.

  1. Disengage the claw to remove the shifting hole cover sub-assembly.



5. REMOVE PATTERN SELECT SWITCH ASSEMBLY
  1. Disconnect the pattern select switch assembly connector.

  1. Disconnect the pattern select switch assembly connector clamp. (for Automatic Transmission)



    C257479
  1. Remove the 2 screws and the pattern select switch assembly from the shifting hole cover sub-assembly.