Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH

LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


2. REMOVE REAR FLOOR FINISH PLATE


    B312237
  1. Using a clip remover, remove the 3 clips.

  1. Disengage the 4 claws to remove the rear floor finish plate.



3. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    B314927
  1. Disengage the 5 clips.



    B314928
  1. Disconnect the connector and remove the luggage compartment inner trim cover LH.



4. REMOVE LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    B314929
  1. Disengage the 2 claws and remove the luggage door opening cancel switch assembly.