Home › Vehicle Interior › LIGHTING (INT) › DOOR COURTESY LIGHT

DOOR COURTESY LIGHT > INSPECTION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSPECT COURTESY LIGHT ASSEMBLY


    E136359E19
  1. Apply battery voltage to the terminals and check that the courtesy light assembly comes on.
    Standard: 
    Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Courtesy light comes on
    If the result is not specified, replace the bulb or the courtesy light assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Courtesy Light Assembly)