Home › Engine / Hybrid System › FA20 COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLING FAN MOTOR


    A103699E10
  1. Check that the motor operates smoothly when the battery is connected to the cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (Cooling fan motor)
    If the motor does not operate smoothly, replace the cooling fan motor.

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    Cooling fan motor
    20°C (68°F)
    7.4 to 11.4 A at 12 V

    If the result is not as specified, replace the cooling fan motor.



2. INSPECT NO. 2 COOLING FAN MOTOR (w/ Air Conditioning System)


    A103699E10
  1. Check that the motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 cooling fan motor)
    If the motor does not operate smoothly, replace the No. 2 cooling fan motor.

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    No. 2 cooling fan motor
    20°C (68°F)
    7.4 to 11.4 A at 12 V

    If the result is not as specified, replace the No. 2 cooling fan motor.