Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH

LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH > INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    B314957E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pushed (ON)
    Below 1 Ω
    1 - 2
    Not pushed (OFF)
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Luggage Door Opening Cancel Switch Assembly)
    If the result is not as specified, replace the switch assembly.