Home › Vehicle Interior › DOOR LOCK › LUGGAGE COMPARTMENT DOOR LOCK

LUGGAGE COMPARTMENT DOOR LOCK > INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE DOOR CLOSER ASSEMBLY


    B175598E03
  1. Check the operation of the door lock motor.

    1. Move the door lock to the closed (lock) position.

    2. Apply battery voltage to the door lock motor and check the operation of the door lock motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1 (B)
      Battery negative (-) → 2 (E)
      Luggage compartment door lock motor open (unlock) operation

      If the result is not as specified, replace the luggage door closer assembly.

  1. Check the operation of the door courtesy switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      2 (E) - 3 (D+)
      Locked
      10 kΩ or higher
      2 (E) - 3 (D+)
      Unlocked
      Below 1 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (Luggage Door Closer Assembly)
      *b
      Lock
      *c
      Open
      If the result is not as specified, replace the luggage door closer assembly.