Home › General › SPECIFICATIONS › FA20 ENGINE CONTROL

FA20 ENGINE CONTROL > TORQUE SPECIFICATIONS



Part Tightened
N*m
kgf*cm
ft.*lbf
Engine mount assembly x Front suspension cross member
45
459
33
Cylinder head cover sub-assembly x Injector driver
6.4
65
57 in.*lbf
Cylinder head cover sub-assembly x Injector cover
19
194
14
Timing chain or belt cover sub-assembly x Camshaft timing oil control valve (OCV)
6.4
65
57 in.*lbf
Throttle with motor body assembly x Intake manifold
8.0
82
71 in.*lbf
ECM x Body
7.5
76
66 in.*lbf
Accelerator pedal assembly x Body
7.5
76
66 in.*lbf
MASS air flow meter x Air cleaner case sub-assembly
1.0
10
9.0 in.*lbf
VVT sensor x Cylinder block sub-assembly
6.4
65
57 in.*lbf
Crankshaft position sensor x Cylinder block sub-assembly
6.4
65
57 in.*lbf
Spark plug x Cylinder head sub-assembly
17
173
13
Ignition coil x Cylinder head cover sub-assembly
8.5
87
75 in.*lbf
Clutch flexible hose bracket x Body
(for RHD Manual Transmission)
7.5
76
66 in.*lbf
Engine wire x Injector cover
11
112
8
Engine coolant temperature sensor x Cylinder head sub-assembly
18
184
13
Engine oil temperature sensor x Timing chain or belt cover sub-assembly
18
184
13
Knock sensor x Cylinder block sub-assembly
24
245
18
Manifold absolute pressure sensor x Intake manifold
4.0
41
35 in.*lbf
Air fuel ratio sensor x Exhaust manifold
(without SST)
21
214
16
Air fuel ratio sensor x Exhaust manifold
(with SST)
18
184
13
Heated oxygen sensor x Exhaust manifold
(without SST)
21
214
16
Heated oxygen sensor x Exhaust manifold
(with SST)
18
184
13