Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

POWER STEERING SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



CHECK DLC3
  1. Check the DLC3 (Click here).


FUNCTION OF EPS WARNING LIGHT


    C188311E02
  1. When a malfunction is detected in the power steering system, the EPS warning light in the combination meter comes on to inform the driver of the malfunction.

    HINT:
    When power assist is stopped or reduced, the EPS warning light comes on.
    Power assist is stopped:
    1. When a malfunction occurs in the power steering system (including lost CAN communication, etc.)
    2. When the engine stalls (not a malfunction)
    3. During the period after the ignition switch is turned to ON until the engine is started (not a malfunction)
    Power assist is reduced:
    1. When a malfunction occurs in the power steering system (including lost CAN communication, etc.)
    2. When the battery voltage decreases (not a malfunction)