POWER STEERING SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / EMPS / Trouble Codes.
Read the DTCs following the display on the GTS.
Refer to Diagnostic Trouble Code Chart for DTC information (Click here).
| CLEAR DTC |
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / EMPS / Trouble Codes.
Clear the DTCs by following the display on the GTS.
Turn the ignition switch off.
Disconnect the GTS from the DLC3.