Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR

COMPRESSOR > INSPECTION

for Preparation Click here



1. INSPECT COMPRESSOR WITH MAGNET CLUTCH


    E250260E01
  1. Disconnect the connector from the compressor with magnet clutch.
    Text in Illustration 
    *a
    Component without harness connected
    (compressor with magnet clutch)

  1. Apply battery voltage to the clutch and check operation of the clutch.

    Standard Resistance:
    Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Body ground
    Magnet clutch is engaged

    If the result is not as specified, replace the compressor.