CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM |
| OVERALL CAN BUS DIAGRAM |
Control system CAN is composed of 1 bus.

| *1 | V Bus | *2 | V Bus Terminating Resistor |
| *3 | Skid Control ECU (Brake Actuator Assembly) (for RHD) ECM (for LHD) (for V Bus) | *4 | Combination Meter Assembly (for V Bus) |
| *5 | Main Body ECU (Network Gateway ECU) (for V Bus) | *6 | Certification ECU (Smart Key ECU Assembly) (for V Bus) |
| *7 | DLC3 (for V Bus) | *8 | Steering Angle Sensor (Spiral Cable Sub-assembly) (for V Bus) |
| *9 | PSP (Option Connector) (for V Bus) | *10 | Air Bag ECU Assembly (for V Bus) |
| *11 | Air Conditioning Control Assembly (for V Bus) | *12 | TCM (for V Bus) |
| *13 | Power Steering ECU Assembly (for V Bus) | *14 | ECM (for RHD) Skid Control ECU (Brake Actuator Assembly) (for LHD) (for V Bus) |
| V BUS |



