Home
›
Vehicle Interior
›
METER / GAUGE / DISPLAY
›
CLOCK SYSTEM
CLOCK SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING
for Preparation
Click here
Use these procedures to troubleshoot the clock system.
1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT
3.PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table (
Click here
).
NEXT
4.ADJUST, REPAIR OR REPLACE
NEXT
5.CONFIRMATION TEST
NEXT
END