DOOR CONTROL TRANSMITTER (w/ Entry and Start System) > INSTALLATION |
| 1. INSTALL TRANSMITTER BATTERY |
![]() |
Install a new transmitter battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.
| *1 | Transmitter Battery |
![]() |
Install the transmitter housing cover by pressing down on it as shown in the illustration.
| *1 | Transmitter Housing Cover |
![]() |
Insert the mechanical key into the transmitter.
| *1 | Mechanical Key |
Press one of the transmitter switches and check that the LED illuminates.