Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/ Entry and Start System)

DOOR CONTROL TRANSMITTER (w/ Entry and Start System) > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER BATTERY (for Type A)

NOTICE:
Take extra care when handling these precision electronic components.



    B267245E01
  1. Push the release hook knob and extract the mechanical key.
    Text in Illustration 
    *1
    Release Hook Knob
    *2
    Mechanical Key



    B267246E01
  1. Insert a precision screwdriver with its tip wrapped in protective tape and pry apart the transmitter housing cover.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Transmitter Housing Cover



    B248063E02
  1. Insert a precision screwdriver with its tip wrapped in protective tape into the gap and gently remove the transmitter battery (lithium battery: CR1632).
    Text in Illustration 
    *1
    Protective Tape
    *2
    Transmitter Battery

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter from being damaged.
    2. Do not push the terminals with your finger.
    3. Do not forcibly pry up the transmitter battery. The terminals may be damaged.
    4. Do not touch the transmitter battery with wet hands. Water may cause rust.
    5. Do not touch or move any components inside the transmitter. It may interfere with proper operation.



2. REMOVE TRANSMITTER BATTERY (for Type B)

NOTICE:
Take extra care when handling these precision electronic components.



    B311754E02
  1. Push the release hook knob and extract the mechanical key.
    Text in Illustration 
    *1
    Release Hook Knob
    *2
    Mechanical Key



    B311755E05
  1. Insert a precision screwdriver with its tip wrapped in protective tape and pry apart the transmitter housing cover.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Transmitter Housing Cover



    B311756
  1. Remove the battery (lithium battery: CR2032).

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter from being damaged.
    2. Do not push the terminals with your finger.
    3. Do not forcibly pry up the transmitter battery. The terminals may be damaged.
    4. Do not touch the transmitter battery with wet hands. Water may cause rust.
    5. Do not touch or move any components inside the transmitter. It may interfere with proper operation.