Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Front Floor)

ELECTRICAL KEY OSCILLATOR (for Front Floor) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RHD and LHD vehicle.
  2. The procedure listed below is for the LHD vehicle.



1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR
  1. Engage the clamp to install the indoor electrical key oscillator.



2. INSTALL FRONT CONSOLE BOX COVER
  1. Connect the connector.

  1. Engage the 6 claws to install the front console box cover.