Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B312538E02
  1. Check that the LED illuminates.

    1. Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 12 (+B)
      Battery negative (-) → 5 (GND)
      LED illuminates

      Text in Illustration 
      *a
      Component without harness connected
      (Power Window Regulator Master Switch Assembly)
      If the result is not as specified, replace the power window regulator master switch assembly.