Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B312539E01
  1. Check that the LED illuminates.

    1. Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 12 (+B)
      Battery negative (-) → 5 (GND)
      LED illuminates

      Text in Illustration 
      *a
      Component without harness connected
      (Power Window Regulator Switch Assembly)
      If the result is not as specified, replace the power window regulator switch assembly.