Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY

REAR SEAT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEATBACK LOCK STRIKER SUB-ASSEMBLY LH
  1. Install the 2 bolts and rear seatback lock striker sub-assembly LH.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }



2. INSTALL REAR SEATBACK LOOK STRIKER SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR SEATBACK LOCK STRIKER COVER LH
  1. Engage the 3 clips and install the rear seatback lock striker cover LH.



4. INSTALL REAR SEATBACK LOCK STRIKER COVER RH

HINT:
Use the same procedure as for the LH side.



5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
  1. Engage the 4 clips and install the package tray trim panel assembly with the center stop light assembly.

  1. Install the 4 clips.

  1. Connect the connector.



6. INSTALL REAR WINDOW SIDE GARNISH LH
  1. Engage the guide and 2 clips.

  1. Install the rear window side garnish LH with the bolt.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



7. INSTALL REAR WINDOW SIDE GARNISH RH

HINT:
Use the same procedure as for the LH side.



8. INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH
  1. Install the 2 lid cover clips from the quarter trim lid sub-assembly LH.

    NOTICE:
    If there is any damage, be sure to replace the lid cover clip with a new one.



    B321466E01
  1. Engage the 2 guides and 6 claws and install the quarter trim lid sub-assembly LH.
    Text in Illustration 
    *1
    Lid Cover Clip



9. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



10. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
  1. Engage the 8 clips and install the luggage compartment trim cover LH.

  1. Install the 3clips.



11. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

HINT:
Use the same procedure as for the LH side.



12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip LH.



13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure as for the LH side.



14. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Engage the 6 claws install the front door scuff plate LH.



15. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.



16. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY
  1. Install the 2 bolts and bench type rear seatback assembly.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }

  1. Install the 3 clips and rear seatback cover.



17. INSTALL REAR FLOOR CARPET ASSEMBLY
  1. Install the 2 clips and rear floor carpet assembly.



18. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH
  1. Engage the hook and install the separate type rear seat cushion assembly LH.

  1. Install the bolt.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }



19. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.