Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY

REAR SEAT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH


    B315744E01
  1. Using hog ring pliers, install the separate type rear seat cushion cover LH to the separate type rear seat cushion pad with 3 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

    Text in Illustration 
    *1
    Hog Ring
    *2
    Hog Ring Pliers



  1. Using hog ring pliers, install 40 new hog rings.


    B315745E01


    Text in Illustration 
    *1
    Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR SEAT CUSHION BRACKET
  1. Install the rear seat cushion bracket to the rear seat cushion assembly LH with the screw.

    HINT:
    Use the same procedure as for both the LH side and RH side.



4. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH
  1. Install the rear seatback lock sub-assembly LH with the 2 bolts.

    Torque:
    25 N*m{ 250 kgf*cm , 18 ft.*lbf }



5. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



6. INSTALL REAR SEATBACK LOCK RELEASE KNOB


    B311412
  1. Rotate the rear seatback lock release knob clockwise to install it to the rear seatback lock rod LH.

    HINT:
    Use the same procedure as for both the LH side and RH side.



7. INSTALL REAR SEATBACK LOCK ROD LH


    B311924
  1. Connect the rear seatback lock rod LH to the rear seatback lock sub-assembly LH as shown in the illustration.

  1. Engage the claw to install the rear seatback lock rod LH.



8. INSTALL REAR SEATBACK LOCK ROD RH

HINT:
Use the same procedure as for the LH side.



9. INSTALL BENCH TYPE REAR SEATBACK COVER


    B311324E01
  1. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 10 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

    Text in Illustration 
    *1
    Hog Ring
    *2
    Hog Ring Pliers



10. INSTALL BENCH TYPE REAR SEATBACK COVER WITH PAD
  1. Temporarily install the bench type rear seatback cover with pad to the rear seatback frame assembly.

  1. Engage the 6 hooks to the rear seatback frame assembly.

  1. Engage the hook.

  1. Install the bench type rear seatback cover with pad with the 4 clips.



11. INSTALL REAR SEATBACK LOCK COVER
  1. Engage the guide and 3 claws to install the rear seatback lock cover.

    HINT:
    Use the same procedure as for both the LH side and RH side.