POWER DOOR LOCK CONTROL SYSTEM > OPERATION CHECK |
| CHECK POWER DOOR LOCK OPERATION |
Check the basic functions.
Check that all doors lock when the lock side of the door control switch is pressed.
Check that all doors unlock when the unlock side of the door control switch is pressed.
Check that all doors lock when the driver door key cylinder is turned to lock using the mechanical key.
Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.
Check the key lock-in prevention function (w/ Entry and Start System).
Place the electrical key in the cabin.
With the driver side door open, turn the door control switch to LOCK, and then close the driver side door. Then check that all doors unlock.
Check the key lock-in prevention function (w/o Entry and Start System).
Turn the ignition switch to ON or ACC.
With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is pressed.*
With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.
Check the security function of the door lock control system.
Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry lock operation*1. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.