Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (except LHD M/T)

BRAKE PEDAL (except LHD M/T) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL BUSH


    C264099E01
  1. Install the 2 brake pedal bushes to the brake pedal.
    Text in Illustration 
    *1
    Brake Pedal Bush
    *2
    Brake Pedal



2. INSTALL BRAKE PEDAL SHAFT COLLAR


    C263754
  1. Apply a light layer of lithium soap base glycol grease to the entire circumference of the brake pedal return spring and the brake pedal shaft collar.
    Text in Illustration 
    V100144
    Lithium soap base glycol grease

  1. Install the brake pedal return spring and the brake pedal shaft collar to the brake pedal.



3. INSTALL BRAKE PEDAL


    C264101E01
  1. Install the brake pedal to the brake pedal bracket sub-assembly.
    Text in Illustration 
    *1
    Brake Pedal
    *2
    Brake Pedal Support Assembly



    C264103
  1. Install the bolt and nut to the brake pedal support assembly.

    HINT:
    Hold the bolt in place and tighten the nut.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }



4. INSTALL BRAKE PEDAL PAD
  1. Install the brake pedal pad to the brake pedal.