Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY


    E221729E01
  1. Apply battery voltage to the connector and check the side turn signal light assembly.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Side turn signal light assembly comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly)
    If the result is not specified, replace the side turn signal light bulb or the side turn signal light assembly.