Home › Vehicle Interior › HEATING / AIR CONDITIONING › ROOM TEMPERATURE SENSOR

ROOM TEMPERATURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for RHD)
  1. Engage the 2 claws and install the cooler (room temp. sensor) thermistor.



2. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for LHD)

HINT:
Use the same procedure as for the RHD.



3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
  1. for LHD

    1. Engage the 3 claws and 4 clips and install the No. 2 instrument panel under cover sub-assembly.

  1. for RHD

    1. Engage the 3 claws and 4 clips.

    2. Connect the cooler thermistor hose and connector and install the No. 2 instrument panel under cover sub-assembly.



4. INSTALL LOWER INSTRUMENT PANEL (for LHD)
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m{ 61 kgf*cm , 53 in.*lbf }