Home › Vehicle Exterior › DOOR / HATCH › HOOD

HOOD > DISASSEMBLY

for Preparation Click here



1. REMOVE HOOD INSULATOR (w/ Side Marker Light)


    B312160
  1. Using a clip remover, remove the 9 clips and hood insulator.



2. REMOVE HOOD INSULATOR (w/o Side Marker Light)


    B314925
  1. Using a clip remover, remove the 12 clips and hood insulator.



3. REMOVE HOOD TO RADIATOR SUPPORT SEAL RH


    B312161
  1. Using a clip remover, remove the 3 clips and hood to radiator support seal RH.

    HINT:
    Use the same procedure for the RH side and LH side.