Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › TCM

TCM > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT SIDE PANEL LH (for LHD without Driver Side Knee Airbag)

HINT:
Use the same procedure as for the RH side.



2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD without Driver Side Knee Airbag)


    B312955
  1. Remove the 2 screws.



    B312956
  1. Disengage the 4 clips.

  1. Disengage the 4 claws and separate the No. 1 instrument panel under cover sub-assembly.



    B313000E01
  1. w/ Automatic Air Conditioning System for RHD:

    1. Disengage the guide and disconnect the aspirator hose.

    2. Disconnect the connector.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.
    Text in Illustration 
    *1
    Aspirator Hose



3. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)
(Click here)


4. REMOVE TCM


  1. for LHD:



      C262567
    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and the TCM.



    3. C262568
    4. Remove the 2 nuts and the TCM bracket.



  1. for RHD:



      C261047
    1. Disconnect the 2 connectors.

    2. Remove the 2 bolts and the TCM.



    3. C261048
    4. Remove the 2 nuts and the TCM bracket.