REAR BUMPER > INSTALLATION |
| 1. INSTALL REAR BUMPER COVER |
Insert the rear light harness to the luggage compartment room.
![]() |
Engage the 3 guides.
![]() |
Engage the 5 claws.
Install the 2 screws.
Install the rear bumper cover with the 8 clips.
Connect the connector.
Engage the clamp to install the rear light assembly harness.
| 2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH |
Install the luggage compartment inner trim cover LH with the 5 clips.
| 3. INSTALL LUGGAGE COMPARTMENT TRIM BOX |
| 4. INSTALL REAR FLOOR FINISH PLATE |
Engage the 4 claws to install the rear floor finish plate.
Install the 3 clips.
| 5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT |