Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER COVER
  1. Insert the rear light harness to the luggage compartment room.



    B313048
  1. Engage the 3 guides.



    B330228
  1. Engage the 8 claws.

    HINT:
    Use the same procedure for the RH and LH sides.

  1. Install the 2 screws.

  1. Install the rear bumper cover with the 8 clips.

  1. Connect the connector.

  1. Engage the clamp to install the rear light assembly harness.



2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
  1. Install the luggage compartment inner trim cover LH with the 5 clips.



3. INSTALL LUGGAGE COMPARTMENT TRIM BOX


4. INSTALL REAR FLOOR FINISH PLATE
  1. Engage the 4 claws to install the rear floor finish plate.

  1. Install the 3 clips.



5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT