Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket to the radio receiver assembly with the 4 screws.



2. INSTALL NO. 2 RADIO BRACKET

HINT:
Use the same procedure as for the No. 1 radio bracket.



3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.

  1. Install the radio receiver assembly with bracket with the 4 bolts.



4. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
  1. Engage the 8 clips and 2 claws to install the instrument panel ornament.



5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
  1. Engage the 3 clips and 3 claws to install the center instrument cluster finish panel sub-assembly.