RADIO RECEIVER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) |
![]() |
Using a moulding remover, disengage the 8 clips and 2 claws to remove the instrument panel ornament.
| *1 | Moulding Remover |
| 3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) |
![]() |
Using a moulding remover, disengage the 2 claws and 4 clips to remove the center instrument cluster finish panel sub-assembly.
| *1 | Moulding Remover |
| 4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
![]() |
Remove the 4 bolts and pull the radio receiver assembly with bracket toward the rear of the vehicle.
Disconnect each connector and remove the radio receiver assembly with bracket.
| 5. REMOVE NO. 1 RADIO BRACKET |
![]() |
Remove the 4 screws and remove the No. 1 radio bracket from the radio receiver assembly.
| 6. REMOVE NO. 2 RADIO BRACKET |