FRONT BUMPER > DISASSEMBLY |
| 1. REMOVE HOOD TO FRONT END PANEL SEAL |
![]() |
Remove the 13 clips and hood to front end panel seal from the front bumper upper retainer.
| 2. REMOVE LICENSE PLATE BRACKET |
Type A
![]() |
Remove the 2 bolts and license plate bracket.
Type B
![]() |
Remove the 2 bolts and license plate bracket.
| 3. REMOVE NO. 2 FRONT BUMPER SIDE SUPPORT LH |
![]() |
Remove the screw.
![]() |
Disengage the 2 claws and remove the No. 2 front bumper side support LH.
| 4. REMOVE NO. 2 FRONT BUMPER SIDE SUPPORT RH |
| 5. REMOVE FRONT BUMPER REINFORCEMENT PLATE LH |
![]() |
Remove the 2 clips and the front bumper reinforcement plate LH.
| 6. REMOVE FRONT BUMPER REINFORCEMENT PLATE RH |
| 7. REMOVE FRONT LOWER BUMPER COVER |
![]() |
Remove the 3 bolts.
Remove the 4 clips and the front lower bumper cover.
| 8. REMOVE FRONT BUMPER STAY BRACKET |
![]() |
Remove the 3 bolts and the front bumper stay bracket.
| 9. REMOVE FRONT BUMPER ENERGY ABSORBER |
![]() |
Remove the front bumper energy absorber.
| 10. REMOVE RADIATOR COVER PLATE |
![]() |
Remove the 6 clips and the radiator cover plate.
| 11. REMOVE HIGH PITCHED HORN ASSEMBLY (except China) |
![]() |
Disconnect the connector.
Remove the bolt, and the high pitched horn assembly with horn bracket sub-assembly.
| 12. REMOVE LOW PITCHED HORN ASSEMBLY (for China) |
![]() |
Disconnect the connector.
Remove the bolt, and the low pitched horn assembly with horn bracket sub-assembly.
| 13. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Remove the 8 bolts and the front bumper reinforcement sub-assembly.
| 14. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
![]() |
Apply protective tape to the front bumper cover in the area around the radiator grille emblem.
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
| *4 | Location Pin |
Using an infrared light, heat the front bumper cover and the radiator grille emblem.
| Item | Temperature |
| Front Bumper Cover | 40 to 60°C (104 to 140°F) |
| Radiator Grille Emblem | 20 to 30°C (68 to 86°F) |
Insert piano wire between the front bumper cover and radiator grille emblem.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the radiator grille emblem to the front bumper cover.
Remove the 2 push nuts and the radiator grille emblem.
| 15. REMOVE NO. 1 LOWER RADIATOR GRILLE |
![]() |
Disengage the 20 claws and remove the No. 1 lower radiator grille.
| 16. REMOVE FRONT BUMPER HOLE COVER LH |
![]() |
Remove the 3 screws and the front bumper hole cover LH.
| 17. REMOVE FRONT BUMPER HOLE COVER RH |
| 18. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Disconnect the connector.
Remove the 2 screws.
![]() |
Disengage the 2 guides and remove the fog light assembly.
| 19. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 20. REMOVE FOG LIGHT COVER LH |
![]() |
Disengage the 10 claws and remove the fog light cover LH.
| 21. REMOVE FOG LIGHT COVER RH |
| 22. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH |
![]() |
Remove the 2 nuts.
Disconnect the connector.
![]() |
Disengage the 2 claws to remove the front turn signal light assembly.
| 23. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH |
| 24. REMOVE FRONT BUMPER HOLE COVER |
![]() |
Disengage the 4 claws and remove the front bumper hole cover.
| 25. REMOVE FRONT SPOILER COVER (for Sport Package) |
![]() |
Remove the 3 clips.
Unstick the double-sided tape.
![]() | Double-sided Tape |
![]() |
Disengage the 8 claws and remove the front spoiler cover.
| 26. REMOVE FRONT SPOILER COVER LH (for Sport Package) |
![]() |
Remove the clip.
Unstick the double-sided tape.
| *A | Type A |
| *B | Type B |
![]() | Double-sided Tape |
![]() |
Disengage the claw and remove the front spoiler cover LH.
| 27. REMOVE FRONT SPOILER COVER RH (for Sport Package) |
| 28. REMOVE FRONT SPOILER RETAINER LH (for Sport Package) |
![]() |
Remove the 2 screws.
![]() |
Put a matchmark on the front bumper cover as shown in the illustration before removing the rear spoiler retainer LH.
| *a | Matchmark |
![]() |
Slide the rear spoiler retainer LH as shown in the illustration and remove it.
| 29. REMOVE FRONT SPOILER RETAINER RH (for Sport Package) |