Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR LIGHT ASSEMBLY


    B312229
  1. Using a clip remover, remove the 2 clips.

  1. Remove the 2 bolts.



    B312230
  1. Disengage the claw to remove the rear light assembly.



2. REMOVE REAR BUMPER SIDE SEAL LH


    B313043
  1. Remove the 4 clips and rear bumper side seal LH.



3. REMOVE REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure for the RH and LH sides.



4. REMOVE REAR BUMPER SIDE RETAINER LH


    B313044
  1. Remove the 2 screws and the rear bumper side retainer LH.



5. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH and LH sides.



6. REMOVE REAR BUMPER SIDE BRACKET LH


    B457916
  1. Remove the 3 screws and rear bumper side bracket LH.



7. REMOVE REAR BUMPER SIDE BRACKET RH

HINT:
Use the same procedure for the RH and LH sides.



8. REMOVE REAR BUMPER REINFORCEMENT


    B313046
  1. Remove the 4 bolts, 2 nuts and rear bumper reinforcement.



9. REMOVE CENTER REAR BUMPER BRACKET


    B313047
  1. Using a clip remover, remove the clip and the center rear bumper bracket.

    HINT:
    Use the same procedure for the RH and LH sides.



10. REMOVE REAR BUMPER PLATE LH


    B453767
  1. Disengage the 4 claws and 2 guides, and remove the rear bumper plate LH.



11. REMOVE REAR BUMPER PLATE RH

HINT:
Use the same procedure for the RH and LH sides.