Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER HOLE COVER


    B322389
  1. Engage the 4 claws to install the rear bumper hole cover.



2. INSTALL CENTER REAR BUMPER BRACKET


    B313047
  1. Install the center rear bumper bracket with the clip.

    HINT:
    Use the same procedure for the RH and LH sides.



3. INSTALL REAR BUMPER REINFORCEMENT


    B313046
  1. Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.

    Torque:
    45 N*m{ 459 kgf*cm , 33 ft.*lbf }



4. INSTALL REAR BUMPER REINFORCEMENT (w/ Side Marker Light)


    B312979
  1. Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.

    Torque:
    45 N*m{ 459 kgf*cm , 33 ft.*lbf }



5. INSTALL REAR BUMPER PROTECTOR


    B322391
  1. Install the rear bumper protector as shown in the illustration.



6. INSTALL REAR BUMPER SIDE BRACKET LH


    B313045
  1. Install the rear bumper side bracket LH with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



7. INSTALL REAR BUMPER SIDE BRACKET RH

HINT:
Use the same procedure for the RH and LH sides.



8. INSTALL REAR BUMPER SIDE RETAINER LH


    B313044
  1. Install the rear bumper side retainer LH with the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



9. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH and LH sides.



10. INSTALL REAR BUMPER SIDE SEAL LH


    B313043
  1. Install the rear bumper side seal LH with the 4 clips.



11. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure for the RH and LH sides.



12. INSTALL NO. 2 REAR BUMPER REINFORCEMENT


    B313042
  1. Install the No. 2 rear bumper reinforcement with the 2 clips.



13. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

HINT:
Use the same procedure as for the No. 2 rear bumper reinforcement.



14. INSTALL REAR CENTER UNDER SPOILER (for Sport Package)


    B312966
  1. Engage the hook to install the rear center under spoiler.

  1. Install the 2 clips.



    B312967
  1. Install the 4 clips.



15. INSTALL REAR UNDER SPOILER BRACKET (for Sport Package)


    B312964
  1. Install the 2 rear under spoiler brackets with the 4 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



16. INSTALL REAR UNDER SPOILER COVER (for Sport Package)


    B312996
  1. Engage the 2 guides to install the rear under spoiler cover.

  1. Engage the 2 claws.

    HINT:
    Use the same procedure as for the RH side.



17. INSTALL REAR SIDE UNDER INNER SPOILER LH (for Sport Package)


    B312987
  1. Slide the rear side under inner spoiler LH as shown in the illustration to install it.

  1. Engage the guide.



    B312962
  1. Install the 3 clips.

  1. Install the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



18. INSTALL REAR SIDE UNDER INNER SPOILER RH (for Sport Package)

HINT:
Use the same procedure for the RH and LH sides.



19. INSTALL REAR SIDE UNDER OUTER SPOILER LH (for Sport Package)
  1. Clean the rear bumper cover surface.

    1. Using a heat light, heat the rear bumper cover surface.

    2. Remove the double-sided tape from the rear bumper cover.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install the rear side under outer spoiler LH.

    1. Using a heat light, heat the rear bumper cover and the rear side under outer spoiler LH.

    2. Remove the peeling paper from the front spoiler cover LH.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. B312970
    4. Engage the claw and install the rear side under outer spoiler LH.



    5. B443975
    6. Apply thorough pressure to the sections with double-sided tape.
      Text in Illustration 
      V100144
      Double-sided Tape

    7. Install the 5 clips.



20. INSTALL REAR SIDE UNDER OUTER SPOILER RH (for Sport Package)

HINT:
Use the same procedure for the RH and LH sides.



21. INSTALL REAR LIGHT ASSEMBLY
  1. Engage the claw to install the rear light assembly.

  1. Install the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Install the 2 clips.