Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY
  1. Engage the 9 clips to install the body rocker panel moulding assembly.

  1. Install the 2 clips.

  1. Install the clip.



2. INSTALL SIDE MUDGUARD RETAINER
  1. Install the 9 side mudguard retainers.