Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE SIDE MUDGUARD RETAINER


  1. Remove the 5 side mudguard retainers.


    B312972



2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


  1. Remove the clip.


    B312974



  1. Remove the 2 clips.


    B312973



  1. Remove the 9 clips and remove the body rocker panel moulding assembly.


    B312975