Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LHD and RHD vehicles.
  2. The procedure listed below is for the LHD vehicles.



1. INSTALL OUTER MIRROR SWITCH ASSEMBLY


    B314856
  1. Engage the 4 claws and install the outer mirror switch assembly.



2. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B314154
  1. Install the power window regulator master switch assembly with front door armrest base panel with the 4 screws.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    B313122E01
  1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly to the front door inside handle.
    Text in Illustration 
    *1
    Front Door Inside Locking Cable Assembly
    *2
    Front Door Lock Remote Control Cable Assembly

  1. Connect each connector.



    B314824
  1. Engage the 10 clips and install the front door trim board sub-assembly.



    B313120
  1. Engage the clip and install the 3 screws.



    B314825
  1. Engage the claw and install the cap.



4. INSTALL DOOR ARMREST COVER LH


    B314960
  1. Engage the guide and 7 claws, and install the door armrest cover.