Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR COVER

HEADLIGHT CLEANER ACTUATOR COVER > REMOVAL

for Preparation Click here


NOTICE:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER


    E212620
  1. Extend the headlight cleaner washer nozzle by hand.

    NOTICE:
    Be careful not to damage the headlight washer actuator sub-assembly or headlight cleaner washer nozzle.



    B405803
  1. Disengage the claw and remove the headlight cleaner washer nozzle cover.