Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT LICENSE PLATE LIGHT ASSEMBLY


    B312243E01
  1. Apply battery voltage to the connector and check the light comes on.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → 1 (B)
    Battery negative (-) → 2 (E)
    License plate light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (License Plate Light Assembly)
    If the result is not specified, replace the license plate light bulb or the license plate light assembly.