LUGGAGE COMPARTMENT DOOR GARNISH > REMOVAL |
| 1. REMOVE LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System) |
![]() |
Remove the 7 clips and luggage compartment door cover.
| 2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder) |
![]() |
Remove the 2 nuts and the luggage compartment door lock cylinder assembly.
![]() |
Disconnect the luggage closer cable assembly.
| *1 | Luggage Closer Cable Assembly |
| 3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder) |
![]() |
Remove the luggage compartment door lock cylinder packing.
| *1 | Luggage Compartment Door Lock Cylinder Packing |
| 4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
![]() |
Disconnect the back door opener switch assembly connector.
Remove the back door opener switch assembly grommet.
![]() |
Disconnect the 2 license plate light connectors.
![]() |
Remove the 3 nuts.
Disengage the clip and remove the luggage compartment door outside garnish sub-assembly.
| 5. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY |
![]() |
Disengage the 2 claws and remove the back door opener switch assembly.
| 6. REMOVE RADIATOR GRILLE EMBLEM (for Rear Side) |
![]() |
Apply protective tape to the luggage compartment door panel in the area around the radiator grille emblem.
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
| *4 | Location Pin |
Using an infrared light, heat the luggage compartment door panel and the radiator grille emblem.
| Item | Temperature |
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Radiator Grille Emblem | 20 to 30°C (68 to 86°F) |
Insert piano wire between the luggage compartment door panel and radiator grille emblem.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the radiator grille emblem to the luggage compartment door panel.
Remove the radiator grille emblem.