Home › Engine / Hybrid System › FA20 EMISSION CONTROL › PCV VALVE

PCV VALVE > INSPECTION

for Preparation Click here



1. INSPECT PCV VALVE SUB-ASSEMBLY
  1. Install a clean hose to the PCV valve sub-assembly.



  1. Check the PCV valve sub-assembly operation.



      A190263E03
    1. Blow air into the cylinder head side and check that air passes through easily.
      Text in Illustration 
      *1
      Clean Hose
      *a
      Air

      CAUTION:
      Do not suck air through the valve. Petroleum substances inside the valve are hazardous to your health.



    2. A190264E03
    3. Blow air into the intake manifold side and check that air passes through with difficulty.
      Text in Illustration 
      *1
      Clean Hose
      *a
      Air
      If the result is not as specified, replace the PCV valve sub-assembly.

  1. Remove the clean hose from the PCV valve sub-assembly.