Home › Engine / Hybrid System › FA20 ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE


    A280261E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    6.85 to 7.65 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Camshaft Timing Oil Control Valve)
    If the result is not as specified, replace the camshaft timing oil control valve.