CAMSHAFT OIL CONTROL VALVE > ON-VEHICLE INSPECTION |
| 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE |
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Turn the A/C switch on.
Inspect the camshaft timing oil control valve (for intake side).
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Linear (Bank 1).
Check the engine speed while operating the camshaft timing oil control valve assembly (for intake side of bank 1) using the GTS.
| Tester Operation | Specified Condition |
| 0 deg (CA) | Normal engine speed |
| 36 deg (CA) | Engine idles roughly or stalls |
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Linear (Bank 2).
Check the engine speed while operating the camshaft timing oil control valve assembly (for intake side of bank 2) using the GTS.
| Tester Operation | Specified Condition |
| 0 deg (CA) | Normal engine speed |
| 36 deg (CA) | Engine idles roughly or stalls |
Inspect the camshaft timing oil control valve (for exhaust side).
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).
Check the engine speed while operating the camshaft timing oil control valve assembly (for exhaust side of bank 1) using the GTS.
| Tester Operation | Specified Condition |
| 0 deg (CA) | Normal engine speed |
| 51 deg (CA) | Engine idles roughly or stalls |
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).
Check the engine speed while operating the camshaft timing oil control valve assembly (for exhaust side of bank 2) using the GTS.
| Tester Operation | Specified Condition |
| 0 deg (CA) | Normal engine speed |
| 51 deg (CA) | Engine idles roughly or stalls |