Home › Engine / Hybrid System › FA20 ENGINE CONTROL › ACCELERATOR PEDAL

ACCELERATOR PEDAL > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ACCELERATOR PEDAL ASSEMBLY
  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the GTS on.

  1. Enter the following menus: Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.

  1. Read the value displayed on the GTS.

    Standard Voltage:
    Accelerator Pedal Operation
    Accel Sensor Out No. 1
    Accel Sensor Out No. 2
    Released
    0.213 to 4.772 V
    0.213 to 4.772 V
    Depressed
    0.213 to 4.772 V
    0.213 to 4.772 V