Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY


    E247210
  1. Disengage the 2 claws.



    E247211
  1. Disengage the 2 guides and disconnect the map light assembly.



    E247212
  1. Disconnect the connector and remove the map light assembly.



2. REMOVE NO. 1 MAP LIGHT LENS


    E247244E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 map light lens.
    Text in Illustration 
    *1
    Protective Tape



3. REMOVE MAP LIGHT BULB
  1. Remove the map light bulb from the map light body.