DOOR COURTESY LIGHT > REMOVAL |
| 1. REMOVE COURTESY LIGHT ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
| *A | for LH Side |
| *B | for RH Side |
| *1 | Protective Tape |
![]() |
Disconnect the connector and remove the courtesy light assembly.
| 2. REMOVE COURTESY LIGHT BULB |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the courtesy light cover.
| *1 | Protective Tape |
![]() |
Remove the courtesy light bulb from the courtesy light body.