Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT

VANITY LIGHT > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the RH side.



1. INSTALL VANITY LIGHT BULB
  1. Install the vanity light bulb to the visor assembly.



2. INSTALL VANITY LIGHT LENS


    B312998
  1. Engage the claw to install the vanity light lens to the visor assembly.



3. INSTALL VISOR ASSEMBLY
  1. Connect the connector.

  1. Engage the visor assembly to the visor holder.

  1. Install the visor assembly with the 2 screws.