Home › Vehicle Exterior › LIGHTING (EXT) › DAYTIME RUNNING LIGHT ASSEMBLY

DAYTIME RUNNING LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL DAYTIME RUNNING LIGHT ASSEMBLY


    B313020
  1. Engage the 2 guides to install the daytime running light assembly.

  1. Install the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

  1. Connect the connector.



2. INSTALL FRONT BUMPER COVER
(Click here)