Home › Vehicle Exterior › LIGHTING (EXT) › FRONT SIDE MARKER LIGHT ASSEMBLY

FRONT SIDE MARKER LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL FRONT MARKER LIGHT ASSEMBLY
  1. Connect the connector.

  1. Engage the claw to install the front marker light assembly.



  1. Check that the side front marker light assembly is installed securely.

    HINT:
    B314973E01
    If the front marker light assembly is not installed securely, widen and adjust the claw.

    Standard:
    Area
    Specified Condition
    a
    3.0 mm (0.118 in.)

    Text in Illustration 
    *1
    Front Marker Light Assembly
    *2
    Claw



2. INSTALL FRONT FENDER LINER
  1. Install the fender liner with the 4 clips.