REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY |
Engage the guide to temporarily install the rear combination light assembly.
![]() |
Tighten the 4 nuts in the order shown in the illustration to install the rear combination light assembly.
Engage the 2 grommets to connect the rear combination light socket and wire sub-assembly.
Connect the connector.
| 2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/ Side Marker Light) |
Connect the connector.
Install the luggage compartment inner trim cover LH with the 5 clips.
| 3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/o Side Marker Light) |
Install the luggage compartment inner trim cover LH with the 5 clips.
| 4. INSTALL REAR FLOOR FINISH PLATE |
Engage the 4 claws to install the rear floor finish plate.
Install the 3 clips.
| 5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT |